colorPol® 편광판은 높은 컨트라스트율과 매우 좋은 투과 속성을 갖는 이색 유리 편광판입니다. 표준 제품으로 파장범위UV (355 - 420 nm)에 있는 colorPol® 편광 필터 및 VIS 와 IR (475 - 5,000 nm)을 주문할 수 있습니다. 근적외선 범위에서는 (1200 - 2,500 nm) 98 %까지의 특히나 높은 투과율을 갖는 저희 colorPol® HT-시리즈를 사용하도록 추천합니다.
특수한 파장범위에서는 콘트라스트와 투과율의 최소값이 보장됩니다. 예를 들어 C4라는 명칭은 콘트라스트가 >= 10,000 : 1 입니다. 즉 104 를 뜻합니다. 최대 편광의 스펙트럼 위치와 콘트라스트는 선택된 기술적 파라미터에 의해 설정됩니다. 편광판의 파장범위 및 콘트라스트와 투과율은 고객의 요청에 따라 맞춤 제작될 수 있습니다.
편광판의 전형적인 두께는 0.2 (± 0.05) mm 에서 0.5 (± 0.05) mm입니다. 기본 유리의 적층으로 이 보다 더 큰 두께를 만들 수 있습니다. CODIXX는 적층용 표준 사이즈즈로 두께 2.0 (± 0.2) mm를 제공합니다. 이 외의 사이즈와 모양은 고객의 요청에 따라 제작될 수 있습니다.
CODIXX 는 그의 독보적인 colorPol® 기술로 인해 세계 최초로 구조적인 편광판을 제조하고 있습니다. colorPol® S 편광판은 원하는대로 다양한 편광 방향과 파장범위를 갖는 범위를 갖습니다. 10µm의 범위까지 구조 사이즈가 가능합니다.

Unlaminated | Laminated1) | |
---|---|---|
Optical parameter | ||
Transmitted wavefront distortion (TWD) | < 3 λ | < λ/4 |
Beam deviation | < 20 arc min. | < 1 arc min. |
Accuracy of polarization axis to edge 2) | < 0.5° | |
Acceptance angle 3), 4) | ± 20° | |
Refractive index at 633 nm (RI) 5) | 1.525 ± 0.005 | |
Cosmetic parameter | ||
Usual surface quality 6) | reference to ISO 10110-07: 5/2 x 0.04 per Ø10mm in dependence on MIL-O-13830A: S/D 40/20 | |
Mechanical parameter | ||
Clear aperture (CA) | 80% for parts < 2 x 2 mm² 90% for parts < 20 x 20 mm² 95% for parts ≥ 20 x 20 mm² | |
Edge chips7) | 0.05 mm to 0.2 mm, dependent upon part size; < 0.05 mm on request | |
Specific weight | 2.5 ± 0.1 g/cm³ | |
Coefficient of elasticity E | 70 ± 5 kN/mm² | |
Physical parameter | ||
Coefficient of thermal expansion (CTE) | 8.1 ± 0.3 x 10-6 K-1 (0-100°C) | |
Specific heat | 1.0 ± 0.1 J/gK | |
Thermal conductivity | 0.94 ± 0.05 W/mK | |
Operation limits | ||
Laser damage threshold (LDT) | ||
a) Continuous wave (CW) | 10 W/cm² continuous block 25 W/cm² continuous pass | 1 W/cm² continuous block 5 W/cm2 continuous pass |
b) Pulsed | 12 MW/cm² pulse peak power (equivalent to 1 µJ/cm² pulse power density) | 1 MW/cm² pulse peak power (equivalent to 100 nJ/cm² pulse power density) |
Operating temperature range | up to +400°C | UV and mounted: -20°C to +80°C All other: -20°C bis +120°C |
Durability | ||
Thermal cycle | -40°C to +80°C 200 cycles (DIN EN 60068-2-14 method Na) | |
Humid storage | 85°C, 85% rel. humidity, 1,000 h according to Telcordia GR-1221-CORE | |
UV-stability | UV-stability 20 mW/cm² after 60 h irradiation without any degradation | |
Chemical resistance | colorPol® polarizers are insensitive to most organic and cleaning solvents, acids and bases 8) and distilled water. |
1) laminated, ground an polished
2) less tolerance available upon request
3) exceeding this angle may lower contrast and transmittance
4) AR-coating may limit this angle
5) RI for other wavelengths on request
6) other quality grades available on request
7) other specifications available on request
8) AR-coating may limit the resistivity