colorPol® 偏振片是一种带有高对比率以及出色透射性的二向色玻璃偏振片。在标准产品系列范围中,有UV波长范围(355 - 420 nm)与VIS 以及 IR(475 - 5,000 nm)的 colorPol® 偏振片供选择。在近距红外线范围中(1200 - 2,500 nm),我们推荐您使用colorPol® HT系列偏振片,它们具有高度的透射率,最高可达98 %。
在规范的波长范围中,对比度与透射率的最小值均被保证。比如C4表示对比度 >= 10,000 : 1,也就是104。最大偏振与对比度的光谱位置可以通过所选的技术参数设置。偏振的波长范围、对比度以及透射率也可以按照客户需求个别调整。
偏振片的典型厚度为 0.2 (± 0.05) mm 到 0.5 (± 0.05) mm。更高厚度可以通过在载镜上压层来实现。CODIXX提供的压层标准厚度为 2.0 (± 0.2) mm。更多尺寸与形状可以按照客户需求来定制。
借助独特的 colorPol® 技术,CODIXX成为了世界上首家生产结构化偏振片的公司。colorPol® S偏振片具有任意成型的区域,并带有不同的定向与波长范围。10µm范围之内的结构尺寸也可供您选择。

Unlaminated | Laminated1) | |
---|---|---|
Optical parameter | ||
Transmitted wavefront distortion (TWD) | < 3 λ | < λ/4 |
Beam deviation | < 20 arc min. | < 1 arc min. |
Accuracy of polarization axis to edge 2) | < 0.5° | |
Acceptance angle 3), 4) | ± 20° | |
Refractive index at 633 nm (RI) 5) | 1.525 ± 0.005 | |
Cosmetic parameter | ||
Usual surface quality 6) | reference to ISO 10110-07: 5/2 x 0.04 per Ø10mm in dependence on MIL-O-13830A: S/D 40/20 | |
Mechanical parameter | ||
Clear aperture (CA) | 80% for parts < 2 x 2 mm² 90% for parts < 20 x 20 mm² 95% for parts ≥ 20 x 20 mm² | |
Edge chips7) | 0.05 mm to 0.2 mm, dependent upon part size; < 0.05 mm on request | |
Specific weight | 2.5 ± 0.1 g/cm³ | |
Coefficient of elasticity E | 70 ± 5 kN/mm² | |
Physical parameter | ||
Coefficient of thermal expansion (CTE) | 8.1 ± 0.3 x 10-6 K-1 (0-100°C) | |
Specific heat | 1.0 ± 0.1 J/gK | |
Thermal conductivity | 0.94 ± 0.05 W/mK | |
Operation limits | ||
Laser damage threshold (LDT) | ||
a) Continuous wave (CW) | 10 W/cm² continuous block 25 W/cm² continuous pass | 1 W/cm² continuous block 5 W/cm2 continuous pass |
b) Pulsed | 12 MW/cm² pulse peak power (equivalent to 1 µJ/cm² pulse power density) | 1 MW/cm² pulse peak power (equivalent to 100 nJ/cm² pulse power density) |
Operating temperature range | up to +400°C | UV and mounted: -20°C to +80°C All other: -20°C bis +120°C |
Durability | ||
Thermal cycle | -40°C to +80°C 200 cycles (DIN EN 60068-2-14 method Na) | |
Humid storage | 85°C, 85% rel. humidity, 1,000 h according to Telcordia GR-1221-CORE | |
UV-stability | UV-stability 20 mW/cm² after 60 h irradiation without any degradation | |
Chemical resistance | colorPol® polarizers are insensitive to most organic and cleaning solvents, acids and bases 8) and distilled water. |
1) laminated, ground an polished
2) less tolerance available upon request
3) exceeding this angle may lower contrast and transmittance
4) AR-coating may limit this angle
5) RI for other wavelengths on request
6) other quality grades available on request
7) other specifications available on request
8) AR-coating may limit the resistivity